TOTAL SOLUTION ENGINEERS FOR COMPRESSED AIR SYSTEM

:: MOISTURE SEPARATORS

It is designed on impingement principle & basic function is to separate bulk quantity of bigger oil & moisture droplets from compressed air. The separated oil & moisture gets collected in sump & further drained out effectively by providing suitable drain at bottom.

Click here to place an enquiry.

Types :

Baffle Type
Demister Pad Type
Centrifugal Type
Centrifugal cum Demister Pad Type.

Location :

After – After Cooler in between pipe line.
Outlet of Compressor at coolest place on pipe line.

Range :

½” to 12” line size at operating pressure of 16 Kg/cm².

MOC :

Housing - As per IS 1239.
Baffle / Fins - IS 2062
Demister - SS 304 / SS 316

* Note : Higher pressure / range can be offered on request.

MODELS

MOISTURE SEPARATOR (BAFFLE TYPE) MAX. 10 KG/CM2 OP. PRESSURE

S/N	MODEL	END CONNECTION	FLOW
01	DMS – 15	½” BSP SC. F	45
02	DMS – 25	1” BSP SC. F	100
03	DMS – 40	1 ½” FLGD. ASA 150#	200
04	DMS – 50	2” FLGD. ASA 150#	380
05	DMS – 65	2 ½” FLGD. ASA 150#	500
06	DMS – 80	3” FLGD. ASA 150#	760
07	DMS – 100	4” FLGD. ASA 150#	1860
08	DMS – 150	6” FLGD. ASA 150#	3500
09	DMS - 200	8” FLGD. ASA 150#	7500
10	DMS - 250	10” FLGD. ASA 150#	13000

Click here to place an enquiry.